214x214mm Heat Bed Sticker Build Plate Tape with Adhesive Backing for 3D Printer

214x214mm Heat Bed Sticker Build Plate Tape with Adhesive Backing for 3D Printer

The Aluminum Heatbed MK3 has features similar to MK2 and you can also operate this board with 12V and 24V two voltage, more practical. It creates an optimal bond between the 3D printed object and builds a surface that maximizes the chances your object will be held in place for the duration of the print and then allow for clean and easy removal of the object from the built surface.

Suitable for PLA, ABS, HIPS, PETG, TPE filament, nylon, and PC material. Can be used with any 3d printer with aluminium build plate of size 214x214mm. Also, it effectively prevents the deformation of ABS, and PETG filament.

This thermal bed power boost to 200W. It can be easily up to temperatures above 110 degrees; It has 4 holes very close to the four corners of positioning. This improved version, in four positioning holes, remains unchanged, and the size is 214 x 214 x 0.5 mm.

check out : Ultrabase 220*220mm 3D Printer Platform Tempered Heated Bed Glass Plate with Microporous Coating

Printer Different Filaments Temperature Settings:

• PLA: 50-70ºC
• Flexible filament: 50-70ºC
• ABS: 100-125ºC (110ºC is recommended)
• PETG: 80-90ºC 

Direction For Use:

• Step 1: Clean the Build Surface
• Step 2: remove the adhesive tape on the back of the sheet partially from one side
• Step 3: Gently apply the glued sheet from the front, while peeling the adhesive tape backward.